How To Protect Outdoor Extension Cord From Rain DIY

If you’re like mine, you spend a lot of time outdoors working on tasks that need electric power, which necessitates the use of extension cords. You’re probably already well aware of the dangers involved, and you want to avoid injuring yourself or your loved ones. Today we discuss how to protect outdoor extension cords from rain DIY.

If it rains, the prospect of electrocuting yourself sends shivers up and down your back or makes you want to leave the project entirely. Not to mention the fact that the issue of electrical cords outside, which is supposed to be easy, can be overwhelming.

Maybe you’re an RV camper that needs extension cords, but you don’t want to risk electrocuting yourself while it’s raining or there’s water nearby.

We’ll go into how to shield yourself from the different threats that come with the elements in this post, so you can operate or use your extension cords easily and with peace of mind.

Method:

Use Cling Wrap-When using extension cords outdoors, industrial quality pallet wrap is a safe way to weatherize the links. Cover the attachment part of the cords securely in plastic wrap, using as much as necessary to hold water out to resist electric shock.

The nice thing about this approach is that you can use it not only as a stand-alone method, but also in conjunction with the other methods mentioned in the article for added weather safety.

The Bottle Method-This technique not only works well for shielding Christmas lights, but it also works well for covering ties.You will need an empty 2-liter soda bottle for this process.A pair of scissors and a utility knife (or box cutter), a sharp edged tool that can cut through a bottle, are needed.The directives are as follows:

1.With your sharp-edged tool, make a cut in the glass about halfway through the bottles.Around the bottle, the cut should be around 1/4 inch.

2.Cut a circular hole at the end of the slit with the scissors; this hole will help hold the cord in place.

3.Then, carefully slip the connections and coils into the bottle, leaving the cords hanging out of the circular holes.

The Bucket Method-This approach necessitates the use of two buckets and a shovel to surround the attachment.First, put one bucket on the deck, then place the attached portion of the cords on top of the first bucket, which is positioned with the opening facing the ground.

Then, using the second bucket, put the opening face down toward the ground and slide it on top of the first to provide a seal.If you’re concerned about waves, dig a tight-fitting hole around the first bucket with a hammer.Slide the first bucket into the dirt, pressing it as far as necessary, and then repeat the previous two measures.A simple weight would be appropriate.

Power Cord Protector-Only a rubber, the non-inflatable inner tube is needed for this process. This approach would fit well for a bicycle inner tube, for example. Cut a hole in one end of the inner tube and insert the extension cord. Cover as much of the inner tube as possible, slip it in, and then take the other end off. Electrical tape is widely recommended (but not required) for securing the inlet.

What We Need Do:

Many people are hesitant to use their extension cables outside.While being prudent is preferable to being careless, being cautious puts you in no danger.Keep in mind that extension cords are just temporary options.Do not leave extension cords out overnight or in the open during the season.

Remove the plug from the socket instead of turning them off at the wall. Often check your cords before using them, particularly if you’re going outdoors.It’s just as necessary to keep your extension cords dry outside as it is to store them in a dry spot.Before plugging something else into the cable, make sure it’s fully secured to the wall.

What We Don’t Need:

We’ve compiled three methods for protecting your outdoor extension cable from rain and humidity below.Although some of these strategies are superior to others, they will all do in a pinch.Never attempt some form of DIY on a live cable.When dealing with cables, do use electrical tape. Steel tape can never be used!

Conclusion:

Patch cables make our lives easier, particularly when we’re working on outdoor projects or undertakings that need electrical power.When using extension cords in the face of the elements, follow these guidelines and be cautious. When you’re outdoors, keep yourself, your loved ones, your equipment, and your extension cords secure.

At all costs, stay away from the elements, particularly water.Using cables that are in one piece to keep the cords in proper working order.If you are unsure about using DIY tools, you can buy cord protectors and other safety precautions at hardware stores or online.

Make aware where you store your wires, and strive to keep them as close to the outlet as possible and keep the connection out of the elements and away from water.Coaxial cables are helpful and when working on campaigns. When using extension cords externally, be careful and secure!

Read More:

How to bypass low oil sensor on generator

Leave a Comment